Fuse distribution PCB 16A 6 output 12V
Power distribution board with LED indication for fuse fault detection.
Maximum capacity: 16A at 12V for all outputs combined.
Maximum pulse current: 8A per output.
Continuous current: 5A per output. The total current must not exceed 16A.
Please use 70 ?m copper thickness on PCB layers.
Tin plating is recommended, as it can significantly reduce the risk of trace overheating.
Fuse distribution PCB 16A 6 output 12V
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(3)
- Likes(1)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Leo FERRARI
-
Interface Icom to Raspberry for radio over ip ROIP
This interface allows Icom radios equipped with an RJ45 PTT connector and a 3.5 mm speaker output to...
-
ICOM PTT rj45 transponder
Interface allowing two ICOM radios to be connected back-to-back in order to create a transponder.Whe...
-
Fuse distribution PCB 16A 6 output 12V
Power distribution board with LED indication for fuse fault detection.Maximum capacity: 16A at 12V f...
-
RF Filter 868 MHZ Lora meshtastic / Meshcore
Filter for Lora ApplicationWarning, shield RF is not include ito the bom. I make my shield myself. Y...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1590 0 5 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
2122 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
2143 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2292 0 1 -
