Ground Plane for ublox L1/L2/L5 GNSS antenna
This GNSS patch antenna ground plane has a diameter of 15 cm and is compatible with ANN-MB0/1/2 (68 mm) and (95mm) mount hole spacing. The mounting holes are electrically connected to ground. Testing of this PCB FR-4 material with standard HASL-lead free finish and copper weight show comparable GNSS positioning and signal quality to a full metal disc of 1.5 mm thickness and the same diameter.
Ground Plane for ublox L1/L2/L5 GNSS antenna
*Wpsload community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Engineer
-
OGRE - Open GNSS Research Equipment v2.0
OGRE - Open GNSS Research Equipment Receiver v2.0There is a need for a low-cost, low-power GNSS inst...
-
Ground Plane for ublox L1/L2/L5 GNSS antenna
This GNSS patch antenna ground plane has a diameter of 15 cm and is compatible with ANN-MB0/1/2 (68 ...
-
OGRE - Open GNSS Research Equipment Receiver
There is a need for a low-cost, low-power GNSS instrument that can be used to track ice motion on gl...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
2529 0 5 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
2982 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
3188 2 1 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
3255 0 2
